How to setup Raspberry Pi as SMART HOME hub – Home Assistant, Node RED, Grafana, InfluxDB etc. (Video Tutorial From Scratch)

Hey,

In this article/video I'll show you how to create a Docker based Smart Home hub on a Raspberry Pi from scratch.

I'm going to install Home Assistant (HASSIO), Node-RED, Mosquitto MQTT, Grafana, InfluxDb, Pi-Hole, Portainer, OpenHAB, Plex media server, Log2Ram & TasmoAdmin, but don't worry it will be easier than you think and everything will be based on Docker containers.

# [https://youtu.be/5JMNHuHv134](https://youtu.be/5JMNHuHv134)

How to setup Raspberry Pi as SMART HOME hub - Home Assistant, Node RED, Grafana, InfluxDB etc. Guide From Scratch

If you want to read instead of watching then check the full article here - [https://peyanski.com/raspberry-pi-as-smart-home-hub-video-tutorial/](https://peyanski.com/raspberry-pi-as-smart-home-hub-video-tutorial/)

After you complete this tutorial you will be able to connect almost every smart device that you have, in one place, and control it from there. Oh and there is even a menu. 

Stay safe,

Kiril

6 thoughts on “How to setup Raspberry Pi as SMART HOME hub – Home Assistant, Node RED, Grafana, InfluxDB etc. (Video Tutorial From Scratch)”

  1. I quickly skimmed through the video and it looks like a cool project. Thanks for sharing! It would be even better if you can show the audience what the final results are at the beginning of the video.

    Reply
  2. I’m a bot, *bleep*, *bloop*. Someone has linked to this thread from another place on reddit:

    – [/r/latexandloaf] [How to setup Raspberry Pi as SMART HOME hub – Home Assistant, Node RED, Grafana, InfluxDB etc. (Video Tutorial From Scratch)](https://www.reddit.com/r/LatexAndLoaf/comments/e34t54/how_to_setup_raspberry_pi_as_smart_home_hub_home/)

     *^(If you follow any of the above links, please respect the rules of reddit and don’t vote in the other threads.) ^\([Info](/r/TotesMessenger) ^/ ^[Contact](/message/compose?to=/r/TotesMessenger))*

    Reply
  3. Great setup! Could you try VictoriaMetrics additionally to InfluxDB next time? It could be faster and slimmer according to [these benchmarks](https://medium.com/@valyala/insert-benchmarks-with-inch-influxdb-vs-victoriametrics-e31a41ae2893). And it supports [PromQL](https://medium.com/@valyala/promql-tutorial-for-beginners-9ab455142085), which is better suited for typical queries over time series than Flux. See [how to build VictoriaMetrics on ARM](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/README.md#arm-build).

    Reply

Leave a Comment